OpenFOAM web server - a step toward Digital Twins
Figure 1: Schematic description of the model
Please provide the model inputs in below. (Some thing)
Inlet flow rate (m³/s)
:
Switch for water inlet [0=flow-OFF; 1=flow-ON]:
Porosity (top layer):
Porosity (middle layer):
Porosity (bottom layer):
Initial fraction of water in the cell [0=no water (dry); 1=fully saturated]:
Total (flow) simulation time (s):
Results
Figure: Volume fraction of water. 0: pure air and 1: pure water.
Figure: Water flow at various locations.